Publicidad
Idiomas disponibles
Idiomas disponibles
1% LED lighting (reflected light)
1^ Direct light/transmitted light switch
1& Microscope tools: a) pipette; b) tweezers
1* Hatchery
1( MicroCut
2) Specimens: a) yeast; b) gum media (specimen inclusion medium); c) sea salt; d) brine shrimp eggs
2! Locking screw
How do I install the MicrOcular?
Note:
The MicrOcular only works without the included Barlow lens! The magnification setting is changed when the
MicrOcular is used, and it must be readjusted with the focus knob.
First, remove the Barlow lens with the current eyepiece from the eyepiece support and place the MicrOcular in
the eyepiece.
How do I install the software?
1. You can download the setup file for installation here:
www.bresser.de/download/CamLabLite
2. Start the installation with a double click on the .exe file and follow the instructions of the installation manager.
3. It is not necessary to install a special driver. The camera is automatically recognized by your Windows opera-
ting system.
Using the MicrOcular
Preparation
1. Slide a specimen under your microscope and focus on it.
2. Remove the eyepiece and Barlow lens from the eyepiece support and the dust cap from your MikrOkular and
then install the MikrOkular into the eyepiece support instead of the Barlow lens.
3. Start your PC if you haven't yet and connect your MikrOkular to the USB port of your computer.
4. Start the „CamLabLite" software and activate the camera by clicking on „USB Video Device.
5. Click on „Snapshot" to take a picture or on „Capture" to record a video.
6. Click on the floppy disk icon to save the image or capture.
Experiments
Use the following web link to find interesting experiments you can try out.
http://www.bresser.de/downloads
Warranty & Service
The regular guarantee period is 5 years and begins on the day of purchase. You can consult the full guarantee
terms as well as information on extending the guarantee period and details of our services at www.bresser.de/
warranty_terms.
EN
13
Publicidad
