Whittier Wood Furniture 876We Instrucciones Para Armar página 4

Fig. 4
4. In each bottom corner, attach a Caster (D) with four 3.5x16mm Pan HeadScrews (B).
See Figures 4 and 4a.
Qe
Fig. 5
A
5. Attach two Small Drawer Sides (Qe) to a Small Drawer Front (Re) through the predrilled holes
with four 4x30 Pan Head Screws (A). Make sure the grooves on the inside face of the sides align
with the groove of the drawer front. See Figure 5. Slide the Drawer Bottom (Ne) into the grooves
of the drawer sides and front. See Figure 5a. Attach the Small Drawer End (Pe) to the drawer
sides through the predrilled holes with four 4x30 Pan Head Screws (A). See Figure 5b. Repeat
steps to assemble the other five small drawers.
Fig. 6
Le
Oe
A
6. Attach two Large Drawer Sides (Le) to a Large Drawer Front (Oe) through the predrilled holes
with six 4x30 Pan Head Screws (A). Make sure the grooves on the inside face of the sides align
with the groove of the drawer front. See Figure 6. Slide the Drawer Bottom (Ne) into the grooves
of the drawer sides and front. See Figure 6a. Attach the Large Drawer End (Me) to the drawer
sides through the predrilled holes with six 4x30 Pan Head Screws (A). See Figure 6b. Slide the
drawers into place. See Figure 6c.
Page 4 - 876We - 11/08
Qe
Re
A
26
Ne
A
Me
A
Fig. 6b
Fig. 4a
B
B
B
Ne
A
Pe
Fig. 6a
A
Fig. 6c
B
B
Fig. 5a
A
Fig. 5b
D
Re
Oe