Descargar Imprimir esta página

PRASTEL EASYKA Manual Del Usuario página 40

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EASYKA -
EASYBKA
8.1
Entering Programming Mode
1.
Press the "#" key two times.
Mode LED will turn off. Door
LED will turn red.
2.
Insert the programming code.
3.
If the Programming Code is
valid the door LED will turn
green and the EASYKA will be
in Programming Mode.
NOTE
The EASYKA must be in
Normal Mode to enter the
Programming Mode.
The factory default Programming Code is 1234
If a Programming Code is not entered within 5 seconds, the
EASYKA will return to Normal Mode.
8.2
To exit the Programming Mode
1.
Press the " #" key once, you will hear a long beep.
2.
The Door LED will be off and the Mode LED will turn green, the
EASYKA has returned to Normal Mode
NOTE
Wrong entries may reset the controller back to Normal Mode.
While in Programming Mode if no key is pressed for 1 minute
the EASYKA will exit programming mode and return to Normal
Mode.
ENGLISH
ISEASYKA_07_06.doc
RED
GREEN
40

Publicidad

loading

Productos relacionados para PRASTEL EASYKA

Este manual también es adecuado para:

Easybka