Descargar Imprimir esta página

ASROCK G43TwinsFullHD Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 98
2.6 Jumpers Setup
2.6 Jumpers Setup
2.6 Jumpers Setup
2.6 Jumpers Setup
2.6 Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap
is placed on pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1
and pin2 are "Short" when jumper cap is
placed on these 2 pins.
Jumper
PS2_USB_PWR1
(see p.2 No. 1)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
Clear CMOS Jumper
(CLRCMOS1)
(see p.2, No. 3)
Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system
setup information such as system password, date, time, and system setup parameters. To
clear and reset the system parameters to default setup, please turn off the computer and
unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper
cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the
CMOS right after you update the BIOS. If you need to clear the CMOS when you just
finish updating the BIOS, you must boot up the system first, and then shut it down before
you do the clear-CMOS action.
FSB1 Jumper
(FSB1, 3-pin jumper, see p.2 No. 32)
FSB2 Jumper
(FSB2, 5-pin jumper, see p.2 No. 31)
FSB3 Jumper
(FSB3, 5-pin jumper, see p.2 No. 31)
When you mount a FSB800 or FSB1066 CPU, and try to overclock to FSB1333 (by BIOS setting)
you may face the problem, that DRAM frequency will be overclocked very high. Please use
jumper to force NB to be strapped at higher frequency, so the DRAM can work at lower frequency.
If you want to overclock the CPU you adopt to FSB1066 on this motherboard, you need to adjust
the jumpers. Please short pin4, pin5 for FSB2 jumper and pin4, pin5 for FSB3 jumper. Otherwise,
the CPU may not work properly on this motherboard. Please refer to below jumper settings.
2 0
2 0
2 0
2 0
2 0
ASRock G43TwinsFullHD Motherboard
Short
Setting
Default
Clear CMOS
Open
Description
Short pin2, pin3 to enable
+5VSB (standby) for PS/2
or USB wake up events.
Default

Publicidad

loading