Paper Shredder
Sheet Capacity
Operating Instructions
Installation
Paper Shred Size
Operation
Maintenance
Paper Entry Width
Troubleshooting
Warning
Credit Card / CD Capacity
Limited Warranty
Voltage
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce sheet capacity.
INSTALLATION
Make sure the basket door is securely closed shut. This shredder features a safety power cut off and will
not operate if door is open. Shredders with pull-out wastebaskets feature a safety power cut off upon
bin removal. The supplied wastebasket activates this switch, which allows the shredder to be operable.
(FIGURE 1)
Attach all 4 caster wheels to the bottom of the wastebasket.
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
Caution: Microcut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
8 Sheets of 20 lb. bond paper*
0.13 in. x 0.35 in. pieces
3.3 mm x 9 mm pieces
8.7 in / 220 mm
1 at a time
120V~60Hz / 3.0 A
FIGURE 1
3