Assembly - Blumfeldt 10032287 Manual Del Usuario

EN
12

ASSEMBLY

1 Unpack the entire contents carefully. Keep in mind that some water
may spill over the rim from the fountain pan. Do not place the solar
fountain on a surface that could be damaged by water.
2 Open the cover on the back.
3
Plug the hose from above into the connection on the top of the pump
and place the pump in the water container.
4 Connect one end of the pump's power cord to the jack on the pump
housing and the other end to the back of the solar panel.
5
Connect the LED light cable to the socket on the control box.
6 Fill the lowest well with water. Make sure that the pump is fully
submerged.
7
Close the flap on the back of the well.
8 Attach the pole to the solar panel and place the solar panel in a sunny
location.
9
The solar fountain is now ready for use.
Cover
Pump