Tabla de contenido
Publicidad
5
WINDOWS ™2000
USB Driver Installation
1. Insert the USB data logger into a
2. Click "Next"
USB port on the computer. The
following screens should automatically
appear. Windows™2000 refers to
the data logger as "USB API" until
the end of this installation
5. Click "Next"
4. Select "CD-ROM drivers" only, then
click "Next"
Important: Leave the CD in the drive while installing your drivers
3. Select "Search for a suitable driver for
my device (recommended)" then click
"Next"
You have successfully
installed the necessary
software and driver for
your Termologger USB-THR.
Please refer to page 8
within this manual for a
guide on how to use the
data logger
6. Windows™2000 now refers to the data
logger as the "F32x Express USB Device"
then click "Finish"
WINDOWS ™ XP
WINDOWS ™XP
USB Driver Installation
1. Insert the USB data logger into a USB port
2. Ensure the CD is in the CD drive. Select
on the computer. The following screens should
automatically appear. Windows™ XP refers to
the data logger as "USB API" and "F32x
Express USB Device" throughout this installation
4. Installation is now complete, click
5. The Window will close and you will see
"Finish"
Important: Leave the CD in the drive while installing your drivers
3. When this window appears, click
"Install the software automatically
"Continue Anyway"
(Recommended)" then click "Next"
NOTE - This is a feature of Windows™XP.
NOTE - A screen appears, showing files
Selecting "Continue Anyway" will not
being copied to your computer
cause any adverse changes/effects
on your computer
You have successfully
installed the necessary
software and driver for
your Termologger USB-THR.
Please refer to page 8
within this manual for a
guide on how to use the
data logger
the following message
6
Publicidad
Tabla de contenido
