JANE nanuq twin Manual Del Usuario página 25

8.- FOLDING THE PUSHCHAIR
To fold the pushchair, push the rear pedals upwards (A) and
then release the catch with your hand (B), and fold the push-
chair completely. 8.1
Press the pushchair lightly when it is folded to ensure that
the side safety catch is activated.
WARNING: It is important to make sure that the child is kept
away from the pushchair while it is being folded or unfolded.
WARNING: The appearance of cutting, compression and pinch
points are inevitable during these operations.
9.- CARRYING
The chassis has a handle incorporated for easy carrying.
10.- USING THE HOOD
Place the hoods on the side tubes of the handlebar on the top
part of the upholstery. 10.1
Fit the clips on the back part until they click into place.
Fit the clip on the central tubes until it clicks into place.
Slide the end of the other hood along the guide to bring
them together. 10.4
8.2
9
10.2
10.3
Once the hood is in place the position may be adjusted by
moving the spoke arch to suit the position of the backrest.
To remove the hoods, follow the same steps in reverse order.
10.5
11.- USING THE STAND
Your NANUQ TWIN pushchair is fitted with a stand.
To unfold the stand pull the cap found on the middle lower
part of the pushchair. Push it in to fold it again.
12.- RAIN COVER
Fit the two lower clasps and the rear Velcro strips of the rain
cover. 12
13.- MAINTENANCE
Do not expose the cover to sunlight for long periods.
Wash the plastic parts with warm water and soap and carefully
dry all the components after.
The cover can be removed for washing.
Regularly check the brakes, harnesses and fastening elements
that may suffer wear and tear through use.
For your safety and the good conservation of this product, it
is important to bring it to one of our official workshops for
regular inspections.
11
25