2.3
2.3
2.3
2.3
2.3
Expansion Slots
Expansion Slots
Expansion Slots
Expansion Slots
Expansion Slots
There are 1 set of K8 Bridge, 4 PCI slots, and 2 AGP slots (the slot 1.5V_AGP1
supports for K7 AGP Interface, and the slot AGP2 supports for K8 AGP Interface) on
K7Upgrade-600 motherboard.
K8 Bridge
(Orange-Colored Bridge (K8BRIDGE_1) + Brown-Colored Bridge (K8BRIDGE_2)):
The set of K8 Bridge allows you to upgrade your AMD 462-Pin CPU to AMD 754-Pin
CPU by installing an add-on ASRock 754Bridge (optional) into this K8 Bridge on
K7Upgrade-600 motherboard. Before you upgrade the AMD 462-Pin CPU to the
AMD 754-Pin CPU, it is necessary to adjust the jumper settings for those required
jumpers on K7Upgrade-600 motherboard. Please refer to the table below for the
correct jumper settings.
The orange-colored Bridge (K8BRIDGE_1) is not an AGP slot, and the
brown-colored Bridge (K8BRIDGE_2) is not an AMR slot! Please do
NOT insert any AGP card into the orange-colored Bridge (K8BRIDGE_1)
and AMR card into the brown-colored Bridge (K8BRIDGE_2)! It may
cause permanent damage to the hardware!
CPU Type
2-Pin Jumpers
462-Pin CPU
J14
(page 2, No. 9)
(Default)
(1 x 2-pin; short )
(page 2, No. 10)
(8 x 2-pin; short )
J14
(page 2, No. 9)
754-Pin CPU
(Using an add-on
(1 x 2-pin; open )
ASRock 754 Bridge)
(8 x 2-pin; open )
ASRock K7Upgrade-600 Motherboard
(K8 Bridge, PCI Slots, and AGP Slots)
(K8 Bridge, PCI Slots, and AGP Slots)
(K8 Bridge, PCI Slots, and AGP Slots)
(K8 Bridge, PCI Slots, and AGP Slots)
(K8 Bridge, PCI Slots, and AGP Slots)
Jumper Settings
J 6
(page 2, No. 32)
(page 2, No. 12)
(5 x 2-pin; short )
(4 x 3-pin; short pin1, pin2)
J4 / J5
J 6
(page 2, No. 32)
(page 2, No. 12)
(5 x 2-pin; open )
(4 x 3-pin; short pin2, pin3)
J4 / J5
(page 2, No. 10)
3-Pin Jumpers
J12
J7 / J8 / J9
(page 2, No. 12)
(4 x 3-pin;
short pin1, pin2)
J11 / J13 / J16
(page 2, No. 14)
(1 x 3-pin; short pin1, pin2)
J7 / J8 / J9
J12
(page 2, No. 12)
(4 x 3-pin; short pin2, pin3)
J11 / J13 /J16
(page 2, No. 14)
(1 x 3-pin;
short pin2, pin3)
9 9 9 9 9