Health Zenith 7313 Manual Del Usuario página 2

2
Figure 2
Figure 3
Helpful Videos – www.hzsupport.com
3. Mount push button. Use either screws or double
sided tape to mount push button.
• Screw Mounting: To mount with screws, remove
back of case by inserting a small screwdriver into
the slot on the top or bottom of the push button
and twisting (see Figure 2). Note: Remove mate-
rial in screw holes (if needed) before mounting
with screws. Attach back of case to door jamb or
wall (see Figure 3). Snap front of push button on.
• Tape Mounting: When attaching push button
using double sided tape, make sure the surface
of the door jamb or wall is clean.
Helpful Answers – 1-800-858-8501