Assembly & Installation; Installation - NewAir AC-14100E Manual Del Propietário

ASSEMBLY & INSTALLATION

INSTALLATION

Before connecting the appliance to a power source, let it stand
upright for approximately 2 hours. This will reduce the possibility
of a malfunction in the cooling system from handling during
transportation.
LOCATION
This unit is a portable air conditioner that may be moved from room to room.
Hot air must be exhausted out of the room for the appliance to work. This can
be done with the included window kit or by cutting a hole into a wall.
•
The air conditioner should be placed on a firm foundation to minimize
noise and vibration.
•
The unit has casters to aid placement, but it should only be rolled on
smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not
attempt to roll the unit over objects.
•
The unit must be placed within reach of a properly rated grounded socket.
•
Never place any obstacles around the air inlet or outlet of the unit.
•
Allow 12 inches to 40 inches of space from the wall to the window for
efficient air conditioning.
www.newair.com
EN
12