Troubleshooting - NewAir AC-14100E Manual Del Propietário

TROUBLESHOOTING

Problem
The air conditioner
does not function.
The unit does not
produce adequate
cooling.
www.newair.com
Possible Causes
The unit may be
plugged in using a
different voltage.
The circuit breaker
may be tripped or
there is a blown fuse.
The water tank is full.
The ambient room
temperature is lower
than the set
temperature.
The unit is in direct
sunlight.
Too many windows or
doors are open.
There is an additional
heat source in the
room or there are too
many people in the
room.
The filter is dusty or
dirty.
Air inlet or air outlet is
blocked.
The ambient room
temperature is lower
than the set
temperature.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker or
check for a blown fuse.
If the full water tank
indicator light is flashing,
empty the water reservoir.
Lower the set temperature.
Close any curtains or move
the unit to a more shaded
area.
Close doors and windows.
Lower the set temperature.
Clean the filter per
instructions above.
Make sure there are no
obstructions to proper air
circulation through the unit.
Lower the set temperature.
EN
24