Tools And Materials; Before You Begin - Kohler K–7103 Guia De Instalacion

Ocultar thumbs Ver también para K–7103:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Tools and Materials

Pipe
Adjustable
Wrench
Wrench
Hacksaw or
Pliers
Tubing Cutter
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

Observe all local plumbing and building codes.
Turn off the main water supplies.
Carefully inspect the fittings for damage before installing.
For replacement installations, remove the wall covering from the
drain end of the bath and remove the existing drain.
If installing a new bath, install the drain before installing the
bath.
If the tubes are cut, remove any burrs.
The overflow ell and drain ell tubes may need to be cut for
proper fit. Dry fit or measure and cut them to the proper length.
Kohler Co. reserves the right to make revisions in the design of
drains without notice, as specified in the Price Book.
089671-2-AC
Flat Blade
Phillips
Screwdriver
Screwdriver
Plus:
• Trap
Plumbers
Thread
Putty
Sealant
Tape
2
Kohler Co.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K–7104

Tabla de contenido