Descargar Imprimir esta página

Wayne Dalton 246060 Instrucciones De Instalación página 2

Equipo de conversión para espacios superiores bajos

Publicidad

Idiomas disponibles

Idiomas disponibles

2
Marking Fork Brackets
Tools Needed:
IMPORTANT: RIGHT AND LEFT HAND
Marker
IS ALWAYS DETERMINED FROM INSIDE
THE GARAGE LOOKING OUT.
Tape Measure
Determine the left and right fork
bracket (see illustration).
Using a tape measure on the shorter
fork, measure 1" from the back edge of
the radius between the two forks. Place
a line with a marker on what will be
the outer side of the fork bracket when
installed, indicating this 1" position.
Repeat for right hand fork bracket.
This mark will be referenced in Step 5
for bracket alignment.
3
Top Bracket Assembly
Tools Needed:
Slide the bar of the right fork bracket
Power Drill
into the right top bracket.
7/16 Socket Driver
Place the rollers of the right fork
bracket into the horizontal track, by
twisting the bracket into position. Align
the edge of the top bracket with the
edge of the section.
Models 9100, 9400, 9600, 5120 &
5140:
Push the top section out against the
jamb until it is vertically aligned with
the other door sections. Align the top
bracket with the edge of the section.
Secure the top bracket to the section
using
(4) 1/4" - 14 x 5/8" self tapping screws
through the pre-punched holes in the
endcap. Repeat for left hand side.
Models 8000, 8100, 8200 & 8300:
Push the top section out against the
jamb until it is vertically aligned with
the other door sections. Align the top
bracket with the edge of the section.
2
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
1"
FORK BRACKET
TOP BRACKET
HORIZONTAL
TRACK
TOP
SECTION
CORRECT
TOP BRACKET
ASSEMBLY
(4) 1/4-14 X 5/8" SELF
TAPPING SCREWS
Models 9100, 9400, 9600, 5120 and 5140
RIGHT FORK
BRACKET,
STEM FACES
TO THE LEFT
LEFT FORK
BRACKET,
STEM FACES
TO THE
RIGHT
LEFT FORK
BRACKET
TAPE MEASURE
TOP BRACKET ASSEMBLY
HORIZONTAL
TRACK
TOP
SECTION
INCORRECT
BRACKET
ASSEMBLY
TOP

Publicidad

loading