4.3. Metal Surface
Place the camera onto the metal surface directly.
4.4. Micro SD installation
The Micro SD card is mandatory for local recording. Please make sure the MicroSD is CLASS10 rated.
Supported between 8GB and 128GB MicroSD card.
Please refer to chapter 2 Product Appearance point 3 to see the Micro-SD card slot location
4.5. Maintenance
Avoid oil stain and kinds of chemicals tarnishing and damaging the lens surface.
Please turn off the power and unplug the power cable, if there is any smoke, disgusting smell, or noise.
Please contact your local retailer or customer service center for help.
Do not allow the plastic/rubber material to touch the camera for a long time. It may result in surface stains.
All the examination and repair work should be done by the qualified service engineers. We are not liable
for any problems caused by unauthorized modifications or attempted repair.
Note:
This quick start guide is for reference only. Slight difference may be found in user interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their respective
owners.
Please visit our website or contact your local service engineer for more information at:
http://security.blaupunkt-service.com
8