Dirty Water Tank Release Latch - Bissell PET STAIN ERASER 2842 Serie Manual Del Usuario

Removing & Emptying the Dirty Water Tank
We have additional tips for maintaining your machine at support.BISSELL.com.
1.
It is important to empty
the Dirty Water Tank when it
reaches the "MAX FULL" line
as the machine is not intended
for use above this point.
4.
Ensure plug is secured back
onto the tank by pressing
firmly in the center of the plug.
WARNING
before performing maintenance or troubleshooting.
6 BISSELL.com
2.
Ensure the machine is OFF.
To remove Dirty Water Tank,
sit the machine upright on a
flat surface. Press up on the
Dirty Water Tank Release
Latch at the top and pull the
tank out.
5.
Return the Dirty Water Tank
to the machine by aligning
the bottom of the tank with
the hook on the machine (as
shown above).
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from charger
3.
Pull the Dirty Water Tank
plug open and empty into a
sink or toilet.
6.
Rotate the tank forward
until the latch has secured it
in place.