Power Source; Battery Installation - memorex M12001 Guía Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

AC CONNECTION
Insert the small end of the AC adapter into
the DC IN 15V jack (located on the rear of
the unit). Connect the other end to a wall
outlet having 120V AC, 60 Hz.
AC Adapter, DC 15V Z
NOTES:
Remove both the DC plug and the AC-
IN plug to disconnect the AC adapter
when not in use.
Only use the supplied AC adapter which has the following specs: DC 15V Z

BATTERY INSTALLATION

Two (2) "AAA" size batteries can be used to
provide a backup for the clock and alarm time for
this unit as follows:
1.
Open the battery door by pushing in on the
tab, then removing the door.
2.
Insert two (2) "AAA" batteries as shown.
Alkaline batteries are recommended for the
longest playing time.
3.
Place
the
the compartment.
NOTES:
• The batteries are used to back-up the clock and alarm times when the AC
adapter is disconnected or there is a power failure.
• The battery indicator will blink in the display when there are no batteries or the
batteries are low and need replacing.
IMPORTANT! See BATTERY PRECAUTIONS on the next page.

POWER SOURCE

battery
door
To DC 5V IN Jack
back
on
5

Publicidad

Tabla de contenido
loading

Tabla de contenido