TC-Helicon GO XLR Guia De Inicio Rapido página 16

16
GO XLR
Controls
(14) (15) (16) (17) (18)
XLR MIC INPUT for audio input from professional microphones.
(14)
For condenser-style microphones that require "phantom
power", go to the AUDIO tab in the GO XLR app and activate the
"Condenser" setting under MIC TYPE.
LINE IN for audio input from devices such as phones, tablets,
(15)
computers, etc.
MIC input for connection to headset microphones. Typically,
(16)
this headset connection will be a pink connector.
NOTE: If you intend to use the popular Blue Yeti*
microphone, which has its own built-in headphone
output, you should run that built-in headphone output
into the GO XLR's MIC input. For Blue Yeti mics powered
via USB, plug the USB connector directly into your
computer for power, but do not select the Blue Yeti as an
audio source on the computer. Instead, the Blue Yeti's
headphone output will be the audio source for mixing
inside GO XLR.
PHONES output jack for your headphones. Typically, the
(17)
headphone connector will be a green connector.
(19) (20) (21)
LINE OUT contains an exact copy of your broadcast stream audio.
(18)
This connection can be used to connect to a dedicated streaming
computer or other devices like speakers.
USB input for PC connection, i rmware updates and remote
(19)
control with GO XLR app.
OPTICAL input for connection to SONY PlayStation† or Microsoft
(20)
Xbox consoles.
‡
DC IN accepts power connection through the included 12 V
(21)
adapter.
*Yeti is a registered trademark of Blue Microphones.
†PlayStation is a registered trademark or trademark of Sony Interactive Entertainment
Inc. SONY is a registered trademark of Sony Corporation.
‡Xbox is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.