Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
8
Rotate bar until step pad surface is level. and tighten all hardware. Repeat steps for passenger side installation.
9
Inspection After Installation
• Inspect all bolts and nuts for proper tightness.
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Congratulations!
You have purchased one of the many quality Lund ® branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
Check position of nerf board and ensure it is properly parallel with rocker panel. Adjust as
Fully tighten all bracket bolts and nuts.
800-241-7219 • Visit us at lundinternational.com
© 2015 Lund International, Inc. All rights reserved.
Lund
and the Lund
®
®
needed.
Figure 8
Figure 9
Lund International
logo are trademarks of Lund International, Inc.
Page 4 of 4
Publicidad
Tabla de contenido
