Husqvarna 592 620801 Manual Del Operador página 6

Container Assembly
1. Install the containers on the support frame,
overlapping containers at the center
supports.
2. Close the cover and lock the latch handles
over the center support tubes.
Lower Chute
1. Raise and hold the deflector shield in the
upright position.
2. Fit the lower chute and hook the rear latch to
the mower deck.
3. Align the bracket slot on the lower chute with
the deflector bracket tab on the mower deck.
Slide the chute down over the tab.
4. With the lower chute in the proper position,
hold the chute securely while hooking the
front latch to the mower deck.
NOTE: While hooking the latches, the deflector
shield may try to push the chute away from the
mower deck opening. It is important to hold the
chute in position while hooking the latches to the
mower deck.
6 6
ASSEMBLY
Upper Chute
1. Push the upper chute through the opening in
the cover assembly.
2. Rotate chute so the chute opening is
downwards toward the container bags.
3. Slide the upper chute onto the lower chute,
lining up the notches and the channels.
4. Stretch the bungee latch up onto the acorn
nut on the upper chute to secure.
shield, turn mower engine off. DO NOT
remove deflector shield from mower. Raise
and hold shield when attaching lower chute
and allow it to rest on chute while in operation.
CAUTION! Before raising deflector