Machine Inspection; Machine Components; Control Panel - NSS CHAMP 3329 RB Manual De Operaciones

MACHINE INSPECTION

•
Now that the machine is unpacked remember to recycle
all packing materials.
•
Inspect the machine for damage or missing
components. If damage is found, contact the local freight
company to file a freight claim.
•
Inspect squeegee assembly for concealed damage.

MACHINE COMPONENTS

CONTROL PANEL

The operator control panel is located to the left of the
operator's seat. This panel has components that control
various machine functions.
See diagram below.
6
5
4
1 Key Switch - key must be turned to the right to activate
machine.
2 Brush Switch - 3 positions, 3 functions:
•
Up is on, lowering brushes to light pressure.
•
Middle is off, raising brushes.
•
Down is on, lowering brushes to heavy
pressure.
•
Brushes only come on when machine is moving in
forward or reverse.
3 Traction Speed Switch - 2 Positions:
•
Down is high speed.
•
Up is low speed.
4 Emergency Stop Button
•
Push for off.
•
Turn for on.
5 Vacuum Switch - 2 positions; 2 functions:
•
Up is on, lowering squeegee.
•
Down is off, raising squeegee.
1
2
3
•
Squeegee automatically rises in reverse.
6 LCD Push Button - Toggles between display
screens. Defaults to screen 1 when turned on
LCD Display Screen - brightly lit to work in all lighting
situations.
Sidekick Chemical Metering System (optional)
Controls for chemical dispensing are located on the Pump
Control Panel.
THE DISPLAY SCREENS
There are many symbols that can be displayed on the LCD.
Therefore, the LCD Push Button can be used to toggle
between pre-defined screens (see Control Panel for
Details).