Klarstein SKYTOWER 360 SMART Manual Del Usuario página 31

Sleep wind:
When the sleep wind mode is activated, the appliance initially continues to run at the
previously set wind speed. After 30 minutes, it is reduced at 30-minute intervals. This
mode is intended to prevent people who fall asleep from feeling uncomfortable due to
the appliance's speed setting being too high.
a) If the sleep wind mode has been activated at high speed, the appliance switches
to medium speed after 30 minutes. The corresponding indicator lights up. After
another 30 minutes of running at medium speed, the appliance switches to low
speed. The corresponding indicator lights up. The appliance then continues to run at
low speed until the timer expires or the appliance is switched off.
b) If the sleep wind mode has been activated at medium speed, the appliance
switches to low speed after 30 minutes. The corresponding indicator lights up. The
appliance then continues to run at low speed until the timer expires or the appliance
is switched off.
c) If the low speed sleep wind mode has been activated, the corresponding indicator
lights up. The appliance continues to run at low speed until the timer expires or the
appliance is switched off.
Cooling/humidification mode
While the appliance is switched on, press the cooling/humidification mode button
to switch the cooling function on and off. The corresponding indicator (9) lights up.
Turning the screen and indicators off/on (remote control)
When the appliance is on, you can press the screen off button
to turn off the screen and all indicator lights. When the screen is off and you press the
screen off button or any other button, the indicator lights come back on but the
other button function is not performed. Press the desired button again to perform the
corresponding button function.
Negative ion function
When you switch on the appliance, the negative ion function is activated and the
corresponding LED indicator (4) lights up. When you switch off the appliance, the
negative ion function is deactivated.
on the remote control
EN
31