Device Overview; Installation - Blumfeldt Heat Square Slim Manual Del Usuario

EN
16

DEVICE OVERVIEW

INSTALLATION

• Heater must be installed by a qualified electrician.
• Place the heater on a firm, level ceiling surface or install the heater on a
strong rigid support (such as strong wooden beams or metal rails etc.).
• The hook on the ceiling hanging the patio heater must be able to take a
weight 3 or 4 times that of the patio heater itself.
• The distance between the bottom of the patio heater to the floor must be
over 1.80 metres.
• Plug the patio heater into a grounded power outlet (220-240 V ~ 50-60 Hz
/10 A).
• Only operate the heater when it is in the upright position.
Wirerope
Power Cord & Plug
Heater Cover
Safety Net
LED-Light
Switch