Parker 650 Serie Manual De Producto página 115

10-4
Certification du Variateur
Attestation
de Conformité In accordance with the EEC Directive
avec la
Directive CEM
We Parker Hannifin Manufacturing Limited,
lorque le
address as below, declare under our sole
variateur est
responsibility that the above Electronic
utilisé comme
Products when installed and operated with
équipement
reference to the instructions in the Product
autonome.
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standards:-
Ce certificat
doit aider à
We Parker Hannifin Manufacturing Limited,
démontrer la
address as below, declare under our sole
Conformité responsibility that the above Electronic
Products when installed and operated with
CEM d'une
reference to the instructions in the Product
machine dans
Manual (provided with each piece of
laquelle le
equipment) is in accordance with the relevant
variateur est
clauses from the following standards:-
utilisé comme
composant.
Parker Hannifin Manufacturing Ltd., Automation Group, SSD Drives Europe
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England.
Le Variateur 650
650 0.37 -7.5
EC D
ECLARATIONS OF
Date CE marked first applied: 26/07/2001
EMC Directive
2004/108/EC
BS EN61800-3(2004)
M
ANUFACTURERS
EMC Declaration
BSEN61800-3 (2004).
Dr Martin Payn (
Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
W 400V
K
C
ONFORMITY
Low Voltage Directive
In accordance with the EEC Directive
2006/95/EC
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment), is in accordance with the following
standard :-
EN50178 (1998)
D
ECLARATIONS
Machinery Directive
The above Electronic Products are components
to be incorporated into machinery and may not
be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Conformance Officer)
FAX: +44(0)1903 737100
Le variateur est
marqué CE pour
la Directive
Basse Tension
lorsqu'il est
installé
correctement.
Le variateur
n'est pas
concerné par la
Directive
Machine car les
principaux
risques d'une
machine sont plus
mécaniques
qu'électriques.Ce
pendant, cette
Déclaration du
Constructeur est
disponible pour
le cas où le
variateur est
utilisé comme
composant d'une
machine..