Installation Instructions - janitza RD 96 Manual De Instrucciones

Remote display Remote display
RD 96 RD 96

Installation instructions

Installation instructions
Installation and device settings Installation and device settings
Janitza electronics GmbH Janitza electronics GmbH
Vor dem Polstück 6 Vor dem Polstück 6
D-35633 Lahnau D-35633 Lahnau
Support tel. +49 6441 9642-22 Support tel. +49 6441 9642-22
Email: info@janitza.de Email: info@janitza.de
www.janitza.de www.janitza.de
2 2 Safety
2 2 Safety
3 3 Brief device description Brief device description
Safety information
Safety information
The installation instructions do not represent a
The installation instructions do not represent a The external RD 96 display: The external RD 96 display:
compete set of all safety measures required for the
compete set of all safety measures required for the • is intended for the Janitza UMG 801 measure- • is intended for the Janitza UMG 801 measure-
operation of the device.
operation of the device. ment device and for front panel installation; ment device and for front panel installation;
Special operating conditions can require additional
Special operating conditions can require additional • requires neither additional software nor drivers • requires neither additional software nor drivers
measures. The installation instructions contain
measures. The installation instructions contain and functions using plug & play via the USB and functions using plug & play via the USB
information which must be observed to ensure your
information which must be observed to ensure your interface of the UMG 801; interface of the UMG 801;
personal safety and avoid material damage.
personal safety and avoid material damage. • has 6 function buttons for operation. • has 6 function buttons for operation.
Symbols used on the device:
Symbols used on the device: A USB cable is included in the scope of delivery A USB cable is included in the scope of delivery
which is used to establish the connection be- which is used to establish the connection be-
The additional symbol on the device
The additional symbol on the device
tween the external display and the UMG 801 using tween the external display and the UMG 801 using
itself indicates an electrical danger
itself indicates an electrical danger
plug&play. plug&play.
that can result in serious injuries or
that can result in serious injuries or
death.
death.
The USB connection cable remains in the switch- The USB connection cable remains in the switch-
This general warning symbol draws
board cabinet or small distribution board and must board cabinet or small distribution board and must This general warning symbol draws
be laid separately from other electrical circuits! be laid separately from other electrical circuits! attention to a possible risk of injury. attention to a possible risk of injury.
Be certain to observe all of the
Please note the special rules for the USB interface Please note the special rules for the USB interface Be certain to observe all of the
in step 5. in step 5. information listed under this symbol information listed under this symbol
in order to avoid possible injury or
in order to avoid possible injury or
even death. even death.
Safety information in the installation instructions is
Safety information in the installation instructions is
marked by a warning triangle and, in dependence
marked by a warning triangle and, in dependence
on the degree of hazard, is displayed as follows:
on the degree of hazard, is displayed as follows:
User Manual: User Manual:
DANGER
DANGER
INFORMATION INFORMATION
Indicates the immediate threat of danger that Indicates the immediate threat of danger that
Further information about the RD 96 external Further information about the RD 96 external
leads to severe or fatal injury. leads to severe or fatal injury.
display can be found in the user manual! display can be found in the user manual!
Further information on the functions, instal- Further information on the functions, instal-
WARNING
WARNING
lation, operation and technical data of the lation, operation and technical data of the
UMG 801 can be found in the corresponding UMG 801 can be found in the corresponding
Indicates a possibly hazardous situation that can
Indicates a possibly hazardous situation that can
usage information! usage information!
lead to severe injury or death.
lead to severe injury or death.
CAUTION
CAUTION
Warns of an immediately hazardous situation
Warns of an immediately hazardous situation
which, if not avoided, can result in minor or mod-
which, if not avoided, can result in minor or mod-
erate injury.
erate injury.
ATTENTION
ATTENTION
Warns of an immediately hazardous situation Warns of an immediately hazardous situation
which, if not avoided, can result in material or
which, if not avoided, can result in material or
environmental damage.
environmental damage.
INFORMATION
INFORMATION
Indicates procedures in which there is no hazard
Indicates procedures in which there is no hazard
of personal injury or material damage.
of personal injury or material damage.
General General
1 1
Disclaimer Disclaimer
Compliance with the usage information for the Compliance with the usage information for the
devices is a prerequisite for safe operation and devices is a prerequisite for safe operation and
attaining the stated performance characteristics attaining the stated performance characteristics
and product features. Janitza electronics GmbH and product features. Janitza electronics GmbH
assumes no liability for bodily injury, material dam- assumes no liability for bodily injury, material dam-
age or financial losses which result from disregard age or financial losses which result from disregard
of the usage information. of the usage information.
Make sure that your usage information is readily Make sure that your usage information is readily
available and legible. available and legible.
Additional documentation can be found on our Additional documentation can be found on our
website at www.janitza.de under website at www.janitza.de under
Support > Downloads. Support > Downloads.
Copyright notice Copyright notice
© 2020 - Janitza electronics GmbH - Lahnau. © 2020 - Janitza electronics GmbH - Lahnau.
All rights reserved. Any reproduction, processing, All rights reserved. Any reproduction, processing,
distribution or other use, in whole or in part, is distribution or other use, in whole or in part, is
prohibited. prohibited.
Subject to technical changes. Subject to technical changes.
• Make sure that your device matches the instal- • Make sure that your device matches the instal-
lation instructions. lation instructions.
• First read and understand the documents asso- • First read and understand the documents asso-
ciated with the product. ciated with the product.
4 4 Mounting Mounting
Safety measures
Safety measures
Install the device in the weatherproof front panel of When operating electric devices, it is unavoid- Install the device in the weatherproof front panel of
When operating electric devices, it is unavoid-
switchboard cabinets. able for certain parts of these devices to conduct switchboard cabinets.
able for certain parts of these devices to conduct
hazardous voltage. Consequently, severe bodily
hazardous voltage. Consequently, severe bodily
injury or material damage can occur if they are not
injury or material damage can occur if they are not
handled properly:
handled properly:
• Before making connections to the device,
• Before making connections to the device,
ground the device by means of the ground wire
ground the device by means of the ground wire
connection, if present.
connection, if present.
• Hazardous voltages can be present in all circuit-
• Hazardous voltages can be present in all circuit-
ry parts that are connected to the power supply.
ry parts that are connected to the power supply.
• There can still be hazardous voltages present in
• There can still be hazardous voltages present in
the device even after it has been disconnected
the device even after it has been disconnected
from the supply voltage (capacitor storage).
from the supply voltage (capacitor storage).
• Do not operate equipment with current trans-
• Do not operate equipment with current trans-
former circuits when open.
former circuits when open.
• Do not exceed the limit values specified in the
• Do not exceed the limit values specified in the
user manual and on the rating plate! This must
user manual and on the rating plate! This must
also be observed during testing and commis- also be observed during testing and commis-
sioning!
sioning!
• Observe the safety and warning notices in the • Observe the safety and warning notices in the
Fig. Mounting orientation, rear view, RD 96 Fig. Mounting orientation, rear view, RD 96
usage information associated with the device
usage information associated with the device
and its components! and its components!
Cutout dimensions: 92 Cutout dimensions: 92 x 92 x 92
+0.8 +0.8 +0.8
(3.62 (3.62 in x 3.62 in x 3.62 in) in)
+0.03 +0.03 +0.03 +0.03
To ensure ventilation of the device, take into ac- To ensure ventilation of the device, take into ac-
count the distances to adjacent components! count the distances to adjacent components!
5 / 8
• Keep the documents associated with the prod- • Keep the documents associated with the prod-
uct available for the entire service life and pass uct available for the entire service life and pass
them on to any possible subsequent users. them on to any possible subsequent users.
• Please find out about device revisions and the • Please find out about device revisions and the
associated amendments of the documentation associated amendments of the documentation
associated with your product at www.janitza.de. associated with your product at www.janitza.de.
Disposal Disposal
Please abide by national regulations! Dispose of Please abide by national regulations! Dispose of
individual parts, as applicable, depending on their individual parts, as applicable, depending on their
composition and existing country-specific regula- composition and existing country-specific regula-
tions, e.g. as: tions, e.g. as:
• Electronic waste • Electronic waste
• Plastics • Plastics
• Metals • Metals
or engage a certified disposal or engage a certified disposal
company to handle scrapping. company to handle scrapping.
Relevant laws, standards and directive used Relevant laws, standards and directive used
Please see the declaration of conformity on our Please see the declaration of conformity on our
website (www.janitza.de) for the laws, standards website (www.janitza.de) for the laws, standards
and directives applied for the device by Janitza and directives applied for the device by Janitza
electronics GmbH. electronics GmbH.
WARNING WARNING
CAUTION CAUTION
Hazard due to disregard of warning and safety
Hazard due to disregard of warning and safety
Material damage due to disregard of the Material damage due to disregard of the
notices!
notices!
mounting instructions. mounting instructions.
Disregard of the warning and safety notices on
Disregard of the warning and safety notices on
Disregard of the installation instructions can dam- Disregard of the installation instructions can dam-
the device itself and in the information on the use
the device itself and in the information on the use
age or destroy your device. age or destroy your device.
of the device and its components can lead to
of the device and its components can lead to
· Provide adequate air circulation in your · Provide adequate air circulation in your
injuries or even death!
injuries or even death!
installation environment. For high ambient installation environment. For high ambient
Observe the safety and warning notices on the
Observe the safety and warning notices on the
temperatures, provide cooling if necessary. temperatures, provide cooling if necessary.
device itself and in the usage information asso-
device itself and in the usage information asso-
ciated with the devices and their components, ciated with the devices and their components,
such as: such as:
· Installation instructions.
· Installation instructions.
· User manual.
· User manual.
· Supplement Safety Information.
· Supplement Safety Information.
Qualified personnel
Qualified personnel
To avoid bodily injury and material damage, only
To avoid bodily injury and material damage, only
qualified personnel with electrical training are per-
qualified personnel with electrical training are per-
mitted to work on the device who have knowledge
mitted to work on the device who have knowledge
of:
of:
• the national accident prevention regulations.
• the national accident prevention regulations.
• safety technology standards,
• safety technology standards,
• installation, commissioning and operation of the
mm mm • installation, commissioning and operation of the
+0.8
device.
device.