Installing Pcie Solid State Drive - Ssd - Dell Latitude 12 Manual Del Propietário

3. To remove the SDD:
a. Place the back side of system on a flat surface.
b. Locate the SSD.
c. Remove the screws (1) that secures the SSD on the system board [1].
d. Slide and lift the SSD card from the connector on the system board [2].
NOTE: Ensure to lift the SSD card by an angle NOT more than 30°.
CAUTION: Lift the SSD card by the side. DO NOT touch the circuit.

Installing PCIe Solid State Drive - SSD

1. Slide and insert the SSD module in the connector on the system board.
NOTE: Ensure that the IC on the SSD module is positioned upward in the connector on the system board. Do ensure to
insert the SSD module by an angle not more than 30° to 35°.
2. Replace the screw (1) to secure the SSD module to the tablet chassis.
3. Install the:
a. Heat sink
b. Display assembly
c. Battery
4. Follow the procedure in
36 Extracción e instalación de componentes
After working inside your computer.