Coaxial Cable & Telephone Line Test - AD Instruments AD8108 Manual De Usuario

AD Instruments
________________________________________________________________________
•Coaxial cable and telephone line measurement function:
After entering into coaxial cable and telephone line measurement (Coax/ Tel)
function, the tester shall have test and show the test result as follows:
It shall display "OPEN" if there is any open circuit or the coaxial cable and
telephone line is not connected. It shall display "SHORT"= if there is any short
circuit.
At the moment, push A=== key to repeat the measurement or push PAIR&L key
to return the main menu. The far-end recognizer will have beep prompt sound if
the connection is in normal condition.
Note: For coaxial cable measurement, it needs accessories: two (2) BNC
matchers. One is used to connect M port RJ45 and the cable to be checked and
the another is used to connect the far-end matcher R port and the cable to be
checked.
For telephone line measurement, it needs accessories: two (2)
RJ11 matchers.
One is used to connect M port RJ45 and the cable to be checked and
the another is used to connect the far-end matcher R port and the cable to be
checked.
©Copyright Abacanto Digital SA.
28
Manual de usuario AD8108