Location - ATH-Heinl Single Lift 12P Instrucciones De Operación

2.4

Location

The machine should be kept away from flammable and explosive materials, as well as from sunlight and
intense light. The machine should be placed in a well-ventilated location.
The machine must be set up on sufficiently firm ground, if necessary, according to the minimum
requirements of the information given in the foundation plan.
In addition to the ground conditions, the guidelines and instructions of the accident prevention regulations
as well as the workplace regulations must be observed when selecting an installation site.
When assembling on floor coverings, check their load-bearing capacity. A construction expert should be
consulted for inspection when mounting on floor coverings.
The machine should only be mounted and used within closed rooms. It has no corresponding safety
features (e.g. IP protection, galvanised design, etc.).
Temperature
Sea level
Humidity
Drawing
B1 (Distance post- side wall)
L1 (Distance post – front wall)
L2 (Distance post – back wall)
H
Permitted operating temperatures:
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-11
4-40 °C
< 1500 m
50% at 40 °C – 90% at 20 °C
Min. 1.000mm
Min. 1.000mm
Min. 4500mm
Min. 3500mm
10-50 °C
Manufacturer ATH-Heinl GmbH & CO.KG
- 14 -