Component List; Noise Information; Technical Data - KRESS KUC31 Manual De Instrucciones

COMPONENT LIST

1. CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BELT HOOK
8. BATTERY CAPACITY INDICATOR
9. BATTERY PACK RELEASE BUTTON *
10. LED LIGHT
11. ON/OFF SWITCH
12. BIT CLIP
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type Designation KUC31 KUC31.2
KUC31.91(C31 - designation of machinery,
representative of drill)
10
EN
Voltage
No load speed
Number of clutch
positions
Impact rate
Max torque
Chuck capacity
Steel
Max.
drilling Wood
capacity
Concrete
Machine weight
Battery Capacity
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
KUC31
KUC31.91
KUC31.2
20V Max**
0-600/0-2000 min
-1
22+1+1
9000-32000 bpm
70 N.m
13 mm
13 mm
40 mm
13 mm
2.0 kg 1.4kg
4.0 Ah /
ACCESSORIES
KUC31
6A Charger (KAC21)
4.0Ah Battery pack
(KAB21)
Double ended bits
(PH2/SL5.5)
Hook
Bit Clip
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841-1 & EN 62841-2-1
Drilling into metal
Impact drilling into
concrete
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
KUC31.2 KUC31.91
1 1 /
2 2 /
1 1 1
1 1 1
1 1 1
L = 80 dB(A)
pA
L = 91 dB(A)
wA
5 dB(A)
Vibration emission value
a =1.246 m/s²
h,D
Uncertainty K = 1.5 m/s²
Vibration emission value
a =7.836 m/s²
h,ID
Uncertainty K = 1.5 m/s²