Kohler K-18486 Guía De Instalación Y Cuidado página 8

Bracket
Tee Rod
Tee
4. Construct the Tee Assembly – Freestanding
Thread the fastener support into the side of the bath with a 1/4"
hex wrench. Do not overtighten.
Ensure the distance from the head of the fastener support to the
bath surface is approximately 1/2" (13 mm).
Thread the fastener rod into the fastener support.
Thread a bracket onto one end of the tee rod until hand tight.
Slide the tee rod through the tee.
Handtighten the remaining bracket onto the other end of the tee
rod.
1219580-2-A
1/2"
(13 mm)
Fastener
Rod
Fastener
Support
8
Bath
Kohler Co.