Package Contents; Hardware Installation - Grandstream GWN7660 Guía De Instalación Rápida

OVERVIEW
EN
The GWN7660 is a high-efficiency, enterprise-grade 802.11ax Wi-Fi 6
access point, ideal for small-to-medium sized businesses, multiple floor
buildings, residential settings and commercial locations. It offers dual-
band 2x2:2 MU-MIMO with DL/UL OFDMA technology and a sophisti-
cated antenna design for maximum network throughput and expanded
Wi-Fi coverage range. To ensure easy installation and management,
the GWN7660 uses a controller-less distributed network management
design in which the controller is embedded within the product's Web
user interface. The GWN7660 is also supported by GWN.Cloud and
GWN Manager, Grandstream's cloud and on-premise Wi-Fi manage-
ment platform. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments
and offers a seamless connection with Grandstream's Wi-Fi capable
IP phones. With support for advanced QoS, low-latency real-time ap-
plications, mesh networks, captive portals, 256 concurrent clients per
AP and dual Gigabit network ports with PoE/PoE+, GWN7660 is an
ideal Wi-Fi access point for medium wireless network deployments with
medium-to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to 45 °C for
operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7660 to environments outside of the following humid-
ity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7660 during system boot up or firmware up-
grade. You may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

1x GWN7660
Access Point
3x Screw
(PM 3 x 50)
1x Ceiling
1x Mounting
Mounting Bracket
Bracket
3x Screw
3x Plastic
(PA 3.5 x 20)
Expansion Bolt
~1~
1 x Quick Installation Guide
3x M3 NUT
GWN7660 PORTS
Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
NET Ethernet RJ45 port (10/100/1000Mbps) to your rout-
er or another GWN76xx.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7660
GWN7660 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7660.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port

HARDWARE INSTALLATION

GWN7660 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch