Selecting the SPEAKER system
Because one or two speaker systems (as main speakers) can
be connected to this unit, the SPEAKERS switches allow you
to select speaker system A or B, or both at once.
SPEAKERS
A
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
2
3
4
Note
This control is effective only for the sound from the main
speakers.
Adjusting the BASS and TREBLE
controls
BASS
0
l
l
2
3
4
5
5
BASS
: Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Note
These controls are effective only for the sound from the main
speakers.
B
ON
OFF
BALANCE
0
l
l
2
3
4
L
5
5
R
TREBLE
0
l
l
2
2
2
3
3
3
4
4
4
5
5
Using the BASS EXTENSION switch
You can boost bass frequency response by setting this switch
to the "ON" position. This switch is effective only on the sound
from the main speakers.
RX-V692
BASS
TON
EXTENSION
BYPA
ON
OFF
Using the TONE BYPASS switch
RX-V692 only
Press this switch to revert instantly to the flat states of the
BASS and TREBLE controls without changing the setting of
these controls.
ASS
ENSION
ON
RX-V592
BASS
EXTENSION
ON
OFF
TONE
BYPASS
OFF
25