Screen Display For Ecg Waveform Recall (Optional) - Gima 35132 Manual De Uso

Short pressing Lead "
Ø
Short pressing Up/Down("
Ø
Short pressing Print "
Ø

4.4 Screen Display for ECG Waveform Recall (Optional)

Note: this screen is only for the monitor with ECG function.
ECG waveform recall screen is as shown in figure 4.4.
ECG waveform displaying area:
1. "II": ECG lead.
2. "X1": waveform gain.
3. "HR 72": heart rate mark and the measured heart rate.
ECG records list area:
"PID": the patient ID number.
²
"Date": the date of ECG measurement record.
²
"Start Time": the start time of ECG measurement record.
²
"End Time": the end time of ECG measurement record.
²
Note: one single ECG record starts from the valid ECG signal (when message "Lead off" disappears) and finishes
when ECG lead is off. One single ECG record is not longer than 1 hour.
Operating instructions:
Press Up " " key or Down "
Ø
User Manual for Vital Signs Monitor
" key to shift the ECG lead.
" / " " ) key to change ECG waveform gain.
" key to start / stop printing real-time ECG waveform.
Figure 4.4 Waveform recall screen
" key to select one ECG record, then press OK key to recall the
30
Waveform recall