Changing The Oven Light Bulb; If Something Goes Wrong - Glem GFM410IX Manual Genérico De Mantenimiento E Instalación

6 Once clean, return the glass panels in the
same order so that the word TERMOGLASS
can be read.
7 Replace the upper clasp of the door, making
sure that the side tabs fit in point 1.

Changing the Oven Light bulb

Caution
First make sure the oven is unplugged before
proceeding to change the bulb.
• Unscrew the bulb-holder glass cover.
• Replace the bulb and reassemble the glass
cover.
The replacement bulb must be resistant to tem-
peratures up to 300ºC. You can order one from
the Technical Assistance Service. Figure 16
For other oven
instructions:
• Loosen the lens from the lampholder with
the help of the appropriate tool. Fig 17
• Exchange the bulb.
• Replace the lens, making sure it fits in the
correct position without forcing it. Fig 18
28
models, follow

If Something Goes Wrong

The oven stops working
Check the fuses and the circuit breaker
Make sure the timer is either in the manual
Check the position of the function
The light inside the oven does not go on
Check that it has been properly inserted
according to the Instruction Manual.
The heating pilot light does not turn on
these
It should only come on while the oven
is heating up to the temperature selected.
Oven smoking during use
Reduce the amount of grease or oil in the tray.
Do not use temperatures higher than
those indicated in the cooking chart.
The expected cooking results
are not achieved
Check the cooking chart for guidance
Caution
If these problems persist despite these tips,
contact Technical Service.
Check the power connection.
for your installation.
or programmed setting.
and temperature setting.
Change the bulb.
Select a temperature.
Select a function.
Normal during first use.
Clean the oven regularly.
on how your oven operates.