EN
1
DESCRIPTION
1.1
PURPOSE
This machine is used to remove and clear away snow from
pavements, gardens, driveways and other ground-level
surfaces.
1.2
OVERVIEW
1
Handle bar
2
Bail lever
3
Safety switch button
4
Chute control rod
5
Battery door
6
Chute deflector
7
Discharge chute
8
LED lights
9
Scraper
10
Impeller
11
Wheel
12
Quick-release lever
13
Lower handle
14
Upper handle
15
Middle handle
16
Knob
17
Bolt
18
Screw
19
Nut
20
Battery pack
21
Battery release button
22
Trigger
23
Chute-rotation box
24
Switch box
English
25
Slot
26
Groove
27
Side wear pad
28
Belt
29
Pulley
30
Skid plates
31
Spacer
32
Cam lock
2
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your battery-
operated (cordless) power tool.
2.1
TRAINING
•
Do not allow children under the age of 14 to operate this
tool. Children who are 14 years of age or older must read
and understand the operating instructions and safety rules
in this manual and must be trained and supervised by a
parent.
•
Read the operating and service instruction manual
carefully. Be thoroughly familiar with the controls and
the proper use of the power tool. Know how to stop the
unit and disengage the controls quickly.
•
Never allow children to operate the power tool. Never
allow adults to operate the power tool without proper
instruction.
•
Keep the area of operation clear of all persons,
particularly small children, and pets.
•
Exercise caution to avoid slipping or falling, especially
when operating in reverse.
•
Do not use on graveled surfaces.
•
Dress Properly – Do not wear loose clothing or jewelry.
They can be caught in moving parts.
•
Wear appropriate boots when operating the snow thrower.
•
Operation of the snow thrower in the hand-held position
is unsafe, except in accordance with the special
instructions for such use provided in the operator's
manual.
2.2
PREPARATION
•
Thoroughly inspect the area where the power tool is to be
used and remove all doormats, sleds, boards, wires, and
other foreign objects.
4
WARNING