1.
Lay the drum grabber on the ground. Lower the
forks of the forklift truck to manually install the drum
grabber. Slide the drum grabber onto the forks.
2. Firmly screw the screws to prevent the drum grabber
from slipping off of the forklift.
CAUTION! For use on poly drums only. Do not
use to handle steel drums.
Maximum Capacity:
One 30 gallon poly drum: 1,000 lbs.
One 55 gallon poly drum: 1,000 lbs.
• Do not use unit for loads exceeding maximum
capacity
• Do not use to lift distorted, out-of-round or
Mauger keg (egg-shaped) drums.
• Do not use drum grabber with manually
operated stackers.
PAGE 2 OF 6
INSTRUCTIONS
CLAMPING AND LIFTING THE DRUM
1.
Position drum grabber grippers under drum lip.
Slowly lift and move drum to desired location.
CAUTION! Use only on poly drums with
extended top lip at least 3/16".
SAFETY
• Do not carry loads over people.
• Do not leave unit unattended with load
suspended in air.
• Do not remove or obscure warning label.
• Grippers must be placed securely under
drum lip.
• Inspect unit before use. Remove unit
immediately from service if damaged or
malfunctioning until repairs have been made.
• Do not modify this product in any way.
1-800-295-5510
uline.com
0521 IH-3343