Mainstays MS11-084-500-14 Instrucciones De Montaje página 4

NOTE: Please do not fully tighten all bolts until you finish assembling the frame. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Attach one Table Leg (D) to the Bottom Stretcher (C) by using two 12 mm Bolts (1) through the
metal bracket and screw into the sockets underneath the Bottom Stretcher. Loosely tighten the bolts
with the provided Allen wrench. See detail #1.
3. Repeat last step with the other 3 Table Legs (D). See detail #1.
Hardware required
(1) 12 mm Bolt
Tools required:
Assembly Instructions for Table
Allen wrench
Sketch
4
Qty.
(8)