Mainstays MS11-084-500-14 Instrucciones De Montaje página 7

9. Connect one set Left and Right Leg Assembly (G & H) together with the Center Support (I). Make
sure that the front space between front legs is wider. Attach them in place using four 12 mm Bolts (1)
as shown in detail #4.
10. Attach a Chair Crossbar (J) between the Left and Right Leg Assembly (G & H) by using two 40 mm
Bolts (2) through the drilled holes on front legs and screw into place. Make sure they fit snugly. See
detail #4.
Hardware required
(1) 12 mm Bolt
(2) 40 mm Bolt
Tools required:
Assembly Instructions for Chair
DO NOT tighten the bolts in this step.
Allen wrench
Sketch
7
Qty.
(4)
(2)