Mainstays MS11-084-500-14 Instrucciones De Montaje página 8

11. Locate one Chair Backrest (E) on a level & protective surface with the sockets facing up, as shown in
detail #5.
12. Attach the assembled seat frame to the Chair Backrest (E) using four 12mm Bolts (1) through the
back plate of Leg Assemblies (G & H) and screw into the sockets on the Chair Backrest. Fasten the
bolts with the provided Allen wrench. See detail #5.
NOTE: DO NOT fully tighten the bolts until the chair has been adjusted & level all the legs so that they
do not wobble. Once adjusted then go back and tighten while making sure that the unit remains level.
Hardware required
(1) 12 mm Bolt
Tools required:
Assembly Instructions for Chair
Allen wrench
Sketch
8
Qty.
(4)