Westfalia WT 487 Manual De Instrucciones página 14

TO SET TIME AND SNOOZE DURATION (default time is at 0:00)
Press SET once during time display mode and, the hour digit "0" flashes. Press
1.
to set the hours.
Press SET once again, the minute digits "00" flash. Press
2.
3. Press SET once again, press
appear to indicate the afternoon time in the 12Hr time format. There is no AM indicator.
Press SET once again, "n05" flashes, press
4.
(from 5 min to 60 min.).
5. Press SET again to confirm. The set time is displayed.
Notes:
1. The clock exits the set mode when no key is pressed in approximate 10 seconds.
2. Press and hold
TO SET ALARM 1 AND ALARM 2 (default alarm time at 6:00)
1. Press and hold AL1-2 /ON-OFF,
the desired hour. Press and hold
Press AL1-2 /ON-OFF once again, the minute digits "00" flash. Press
2.
desired minutes. Press and hold
Press hold AL1-2 /ON-OFF once again, LCD displays "bu" (buzzer)., Press
3.
select the wake-up sound sources :-
bu = Buzzer
rd = Radio
4. Press AL1-2 /ON-OFF once again,
above to set Alarm 2.
5. In the middle of setting the alarm, press SET once to store your alarm setting and exit the
alarm set mode.
Note: the clock exits the alarm set mode when no key is pressed in approximate 10 seconds.
TO TURN ON OR OFF ALARM 1 AND 2
1. Press AL1-2 /ON-OFF once to activate Alarm 1,
2. Press once again to activate Alarm 2,
3. Press once again to activate both Alarm 1 and 2. Both
4. Press once again to deactivate both alarms (both
or
or will accelerate setting at high speed.
LED and hour digit "6" flash, press
or to accelerate setting at high speed.
or to accelerate setting at high speed.
LED and hour digit "6" flash. Repeat Step 1 to 3
LED appears.
EN5
to select "24Hr"  "12Hr". A PM indicator will
or to set the snooze duration
LED appears.
LED and
LED and LED disappear).
or to set the minutes.
or to set
or to set
or to
LED appear.
or