5
SPECIFICATIONS
Fingerprint capacity:
Output:
Push Button input:
Door open time:
Entry mode:
Programming:
Admin./Installer fingers:
Blacklight ON/OFF:
Buzzer ON/OFF:
Firmware upgrade:
Current consumption:
Power supply:
Indication:
IP factor:
Storage/Operating temperature:
Storage/Operating humidity:
Dimensions (mm):
MOUNTING
1.
5mm
RECOMMENDED SWIPING TECHNIQUE
Follow the below instructions for correct finger swiping. Starting from the first finger joint, place the selected
finger on the swipe sensor and move it evenly towards oneself in one steady movement.
Result:
For a valid swipe: Tricolour Status LED turns green + OK Beep(short + long beep)
For an invalid or misread swipe: Tricolour Status LED turns red + Error Beep ( 3 short beeps)
INDICATION
2.
4 (4 x 30mm)
Green
- Access granted
Red
- Acceso denied
Orange
- Idle mode
STAND-ALONE BIOMETRIC + PROXIMITY READER
98 templates
1 relay (2 A/24V CA/CC)
Yes
Pulse (from 1 to 30 seconds) o Toggle (ON/OFF)
Finger
By swiping
1 Administrator and 1 Installer finger
Yes
Yes
Via RS485 converter and windows application
100 mA máx.
9-14 Vdc
Tricolor status led
IP65
from -20 °C to +50 °C
5% to 93% RH without condensation
92 x 51 x 25
3.
OK beep
- short + long beep
ERROR beep
- 3 short beeps
Swipe finger - 2 short beeps
100 mm
94 mm
4.