Manta BUFFALO SPK5000 Manual De Usuario página 9

User's Manual EN
controls on the connected Bluetooth Device.
☛ Audio played through the connected Bluetooth device will now be
heard through the Speaker.
Failure solution:
Power failure
Please check if you turn on the power switch of speaker, the voltage
indicator watch
if show above 9V,please connect power cord and recharge the speaker
correctly if the
voltage is lower than 9V.
No sound when playing CD/MP3
A. Please check if connect RCA audio cable and this speaker correctly,
B. Please check if turn down the lowest volume,
C, Please check if select the correct signal source,
D, Please check if the audio source has fault.
USB equipment doesn't read disc
A. Please check if connect USB/TF card with the speaker,
B. Please check if USB/TF has Mp3 file,
C, Please check if USB/TF card has fault.
Noise of speaker
Speaker has the property of low noise, sometimes the background noise of
the VCD player
and computer sound card is several times higher than that of speaker,
therefore, please
unplug the audio wire of the speaker when check, and the noise of the
speaker shall not
hear at 0.5m away.
Antimagnetic of speaker
The speaker adapts strong magnetic speaker, it is possible to cause
magnetic field interrupt
or magnetization if put the speaker close to the monitor. Then you should
put the speaker a
little far from monitor (Usually the distance should be above 1M)
9