Troubleshooting - Impecca HTDS-5175BT Manual De Usuario

TROUBLESHOOTING

PROBLEM
The main unit does not turn on.
The front panel display is blank.
The icon appears on screen
Picture is distorted
The disc tray isn't ejecting when
pressing the eject button
SOLUTION
Make sure that other devices
plugged into the same pow-
er source (such as the TV) also
work.
There are two power buttons on
the main unit. Make sure that
the power switch on the rear
of the unit is turned on before
pressing the front power button
or the power button on the re-
mote control.
If the remote isn't turning the
system on, press the power but-
ton on the front of the unit. If
this works, check the batteries
on the remote control.
The feature or action can-
not be completed at this time
because:
• The disc doesn't support the
feature (e.g., angles).
• The feature is not available
in this area of the disc (e.g.
fast forward or rewind).
• You've requested a time,
chapter, track, or title num-
ber which does not exist.
The disc might be damaged.
Try another disc. Note that it
is normal for some distortion
to appear during forward or
reverse scan.
Switch to DVD mode by press-
ing the Source button, then try
ejecting again.
23