Whittier Wood Products 716Wb Instrucciones Para Armar página 10

U x12
VV x12
FIG. 12
TO INSTALL THE ADJUSTABLE SHELVES:
12. Stand unit upright. (The Small Adjustable Shelves (Tb) may be used in the upper right hand
section or the lower left hand section. They may both be in the same section or one in each.
The Large Adjustable Shelf (Sb) may be used in the lower right section or the upper left hand
section.) Determine where you want the adjustable shelves and tap the Shelf Brackets (U) into
the proper holes. Install the shelves as shown in FIGURE 12. The shelves may be attached
to the shelf brackets by screwing a #6 x1/2" Undercut Screw (V V ) through the bottom of the
shelf bracket into the shelf. See FIGURE 12a.
TO LEVEL THE UNIT:
13. Rotate Adjustable Glides (P) in the Corner Braces (Q) until unit stands level.
TIPPING RESTRAINT:
14. When you have determined the location of your unit, install the Furniture Tipping Restraint (Z).
Carefully follow the instructions contained on the package.
PAGE 10 – 716Wb — Rev. 8/07
Tb
Tb
Sb
U
VV
FIG. 12a