Whittier Wood Products 716Wb Instrucciones Para Armar página 5

READ RAFIX ATTACHMENT SYSTEM INSTRUCTIONS NOW.
FIG. 2
KK x32
Jb
Ib
2. Tap in Rafix Cams (KK), with notch
facing the edge:
• 3 in the Lower Vertical Divider (Jb)
• 3 in the Upper Vertical Divider (Ib)
• 3 in the Left Side Panel (Ab)
LL x32
FIG. 3
3. Screw Rafix Bolts (LL)
• 6 in the Left Side Panel (Ab)
• 6 in the Right Side Panel (Bb)
• 9 in the Top Shelf (Cb)
• 3 in the Center Shelf (Db)
Note: Be sure these go into holes as shown in Fig. 3.
Ab
Bb
Db
Bb
Ab
Cb
• 4 in the Base (GG)
• 4 in the Crown Moulding (FF)
• 3 in the Right Side Panel (Bb)
• 6 in the Center Shelf (Db)
• 10 in the Bottom Shelf (Eb)
• 4 in the Top Shelf (Cb)
Db
FF
Eb
Cb
Rev. 8/07 — 716Wb – PAGE 5