Whittier Wood Products 716Wb Instrucciones Para Armar página 6

FIG. 4
Jb
Db
4. Attach the Lower Vertical Divider (Jb) to the Center Shelf (Db) by sliding the Rafi x Bolts (LL)
into the Rafi x Cams (KK). Tighten the cams. See FIGURE 4.
X x3
Ib
Db
FIG. 5
5. Attach the Upper Vertical Divider (Ib) to the Center Shelf (Db) with three #8 x 1 5 / " Black Screws (X)
8
through the predrilled holes in the center shelf and into the pilot holes in the bottom edge of the
vertical divider. Start all 3 screws BEFORE fully tightening.
PAGE 6 – 716Wb — Rev. 8/07