Whittier Wood Products 716Wb Instrucciones Para Armar página 7

X x3
FIG. 6
6. Attach the Bottom Shelf (Eb) to the Lower Vertical Divider (Jb) with three #8 x 1
Screws (X) through the predrilled holes in the bottom shelf and into the pilot holes in the
bottom edge of the lower vertical divider.
Start all 3 screws BEFORE FULLY TIGHTENING.
FIG. 7
Ab
7. Attach the Left Side Panel (Ab) to the Center Shelf (Db) and the Bottom Shelf (Eb) by sliding
the Rafi x Bolts (LL) into the Rafi x Cams (KK). Tighten the cams. See FIGURE 7. Repeat and
attach the Right Side Panel (Bb)
Jb
Eb
Db
Eb
5 / " Black
8
Rev. 8/07 — 716Wb – PAGE 7