Operating Conditions; Power Supply Specifications; Environment Operating Conditions; Device Safety Compliance - Terragene IC10/20FRLCD Manual De Instrucciones

Ocultar thumbs Ver también para IC10/20FRLCD:

Manual del usuario (36 páginas)

Tabla de contenido

Idiomas disponibles

Safety information

Ask a qualified technician to verify device

compatibility. Attaching any other device to the

Ethernet port may damage the incubator and may

not be safe for the user.

•Do not attempt to repair the Auto-reader by

yourself, that could lead to major and irreversible

damages to the device. In case of device

malfunction, contact your local distributor for

further assistance.

To reduce the risk of using incompletely

sterilized loads:

•Please

read,

understand,

Instructions for Use of each SCBI before its

incubation.

•Do not remove the SCBI before the incubator

reports the final readout result. Check a result

ticket is printed.

•Check that culture medium completely wets the

spore carrier.

To avoid the risk of injury, related to glass

fragments produced when crushing the glass

ampoule inside the SCBI tube:

•Cool the SCBI during the indicated time before

crushing the ampoule.

•Do not handle the SCBI excessively since this

might cause the glass ampoule to burst.

•Wear safety gloves and glasses when removing

the SCBI from the sterilizer, pressing the SCBI's

cap, and crushing the SCBI's ampoule.

•Do not use your finger for crushing SCBI. Use the

Ampoule Crusher instead.

To avoid a potentially hazardous situation:

•Avoid contact with the hot metal block inside

each incubation position.

•Do not insert your fingers, or any other element,

inside the incubation positions.

•Place only compatible indicators inside the

incubation positions.

To avoid SCBIs from absorbing fluorescent

particles:

•Avoid direct contact between the SCBIs and

Chemical Indicators or Tapes before the SCBI

incubation.

Important

Do not use this product in a manner not specified

by Terragene

S.A., otherwise the protection

provided by the product might be affected.

Only Terragene

S.A. authorized personnel can

access or service the internal components of

the Incubator. Parts or components inside the

Incubator should not be manipulated by the user.

Power supply specifications

Input

parameters

Voltage range

Frequency

*Current

Output parameters

Voltage

**Current

and

the

* 1 Ampere in USA and Canada.

** 3 Amperes in USA and Canada.

Terragene

stabilizers, since they fulfill two functions: to stabilize and

maintain the energy during a power outage.

Environment operating conditions

Environmental

Conditions

Altitude

Operation temperature

Relative humidity

Installation/overvoltage

Degree of contamination

Storage temperature

Voltage

Bionova

following standards and directives:

Electrical Safety.

Electromagnetic

Compatibility (EMC).

European Commission.

Bionova

photobiological risk and do not generate dangerous optical

radiation in any of its normal operation conditions as per the

requirements of IEC 62471 Standard.

Designed under Quality Management System standards ISO

13485:2016/NS-EN ISO 13485:2016.

IC10/20FRLCD Page 6