Structure And Function - GEHA Office X8 CD Manual De Instrucciones

INSTALLING THE SHREDDER
1. The centre of gravity is on the upper part of the device. Put the device
on a level surface, so that it cannot tip over.
2. Use the device neither in the vicinity of heat no cold sources nor in overheated,
wet or dusty environments.
3. Install the device near a socket and put no objects beside
the socket, so that the power plug can be easily pulled
out from the socket .
4. First, insert a collection container (for CD`s/DVD`s)
into the paper tray (see image 1).
5. Make sure that the paper tray is slid into the device
until it catches.
6. Connect the power plug with a customary 220-240V
alternating current socket.

STRUCTURE AND FUNCTION

1 Top Cover
2 Auto Paper Feeding
3 Manual Paper Feeding
4 Off switch
5 Select Switch
Fwd/Auto/Rev
6 Main Unit
7 CD entry
8 Transparent Viewing Window
9 Power Cord
10 Waste Bin
11 Truckle
12 LED Power
13 LED Overheat (red) / Bin full (yellow)
COMMISSIONING THE SHREDDER
A. Manual paper feed
The device can shred a maximum of 8 sheets (DIN A4, 80g/m
document shredder with the the ON/OFF switch. The green LED "Power" comes on.
Use the slide switch to choose between three different operating modes:
10
2
) at once. Switch on the
image 1