Technical Specifications - GEHA Office X8 CD Manual De Instrucciones

MAINTENANCE
Important:
Before you wait the shredder, you must pull the power plug from the socket!
When the waste bin is full, a sensor identifies this and the device shuts down. The yellow
LED "Overheat"/"Bin Full" comes on. Please empty the waste bin.
Clean the outside with a wet cloth. Pay attention that the cloth does not get into the paper
feed. This step only applies for the external parts of the device.
The external part of the device is made of plastic. Therefore, no solvents petrol and benzene
or organic solvents like dilutants may be used. Do not clean the device with a stain remover
to avoid paling, breaking, dissolution or scratching of the device.
Careful:
Pay attention that, when cleaning the outside, no water get into the device.

TECHNICAL SPECIFICATIONS

Model name:
Cutting type:
Cut sire:
Shredding output:
Auto feed:
Cutting speed:
Feed tray width:
Inout voltage:
Dimensions:
Noise level:
Waste bin – volume:
Cycle of operation:
Net weight:
DISPOSAL
The icon with the crossed out garbage can points to the fact that
electric devices may not be disposed of with regular domestic waste.
Please take this device to an approved recycling depot for an
environmentally-friendly disposal.
12
Shredder Office X8 CD
Particles
4 x 30 mm ( Paper), 5 parts(CD or credit card)
8 sheet ( DIN A4, 80g/m²), 1 CD or credit card
up to 60 sheet
2 m/min
225 mm for paper / 122 mm for CD
220-240V AC/ 50-60Hz
345 x 269 x 555 mm
approx. 58 dB
22 L
5 Min. ON / 60Min. OFF
9,16 kg